NAD

2600A

Amplifier, Power

Main Details
Maker NAD Brand
Function
Form Factor Desktop
Signal Path Analog Hardware
Made In Japan
Date Produced 1987 - 1991
Dimensions
(H × W × D)
Weight 13Kg
Frequency Response 20Hz - 20kHz
Notes High Current for Low Impedance - Many loudspeakers have a complex impedance curve that is lower than 8 ohms at some frequencies. The lower and more complex the impedance, the more output current the amplifier must deliver. A special rear panel switch optimizes NAD amplifiers for 8 ohms or for low impedances [ 2 - 6 ohms ].
Adaptive Soft Clipping - NAD premiered the use of Soft Clipping in solid state amplifiers, gently rounding off waveform corners when the amplifier is overdriven. This eliminates any harsh power-supply buzz and high-order distortion.
Additional Specifications
Continuous power output min RMS per channel 150W RMS
Clipping Power 200W -:®:- Dynamic headroom +4dB
RIAA response accuracy ±0.5dB
Damping Factor [8 ohms, 50Hz] > 120
Slew Factor > 50 Slew Rate > 35V / µsec
Input impedance R 20kohms, C = 820 pF
Input sensitivity [ 1W out / rated power ] 90mV / 1.1V -:®:- Voltage Gain 32 x [ 30dB ]
Signal to Noise Ratio [ 1W / 150W, A-weighted ] 100 / 122dB
Bridged Monophonic MODE : Continuous power [ min RMS per channel 20Hz - 20kHz less than rated distortion ] -:®:- 8 ohms 1200W RMS -:®:- 4 ohms 1600W -:®:- Dynamic headroom +5dB

Comments

Login or Register to post a comment