Main Details
Maker Lenco Brand Lenco of Switzerland Company
  • 2 × Channel
Signal Path Analog Hardware
Made In Italy
Power Source AC 110 to 220V 50Hz
Notes The plinth on some included photographs, belongs to a regular L75. This turntable is sold as a raw unit, without plinth, but with plans included to cut a surface to mount the turntable. This model was designed to be mounted in bars/dancehalls/disco's/... for DJ purposes.

The S-version differs from the regular version by the S-shaped arm. Although still to the heavy side, it performs very well, opposed to the (dancing) straight arm of the regular L75.

You can adjust stepless between below 33rpm until above 78rpm. It's not designed to be adjusted while running: it's no problem when speeding up, but the high mass of the plate gives problems when slowing down, as irregular drag between the plate and the idler wheel occurs.

A small yellow screwdriver is supplied to adjust the antiskating mechanism. There is an antiskating weight of 1 g & 1,7 g supplied.
Tracking weight is adjusted in the regular way by screwing the counterweight on the back of the arm closer or further from the balance point of the arm.
The arm has a standard SME fitting, the Lenco headshell has two adjustable screws to adjust the cartridge alignment.
A white hole adapter is supplied.
Speed can be fine tuned by moving the fixed positions of the speed slider control after setting them loose by the corresponding screw.

Supplied with a Lenco headshell and Lenco M100 cartridge with corresponding stylus.

This is an original Lenco of Switzerland-product, not the cheap line of Asian USB-turntables released nowadays under the same brand.
Additional Specifications
Speed Select 33⅓ rpm
Speed Select 45 rpm
Speed Select 78 rpm
Drive Type Idler Drive
Phono Out
Connector: RCA (Phono, Cinch)
Description: Stereo, Unbalanced
Connector: Other
Description: Stereo, Unbalanced
Earth Wire
Connector: Other
Parameter: Speed
Control Type: Slide Switch
Range: -33rpm - +78rpm
Parameter: On/off
Control Type: Rotary Switch
Parameter: Arm Up/Down
Control Type: Slide Switch
Parameter: Antiskating
Parameter: Tracking Weight


Login or Register to post a comment