Main Details
Maker Technics Brand
  • 2 × Channel
Form Factor Tabletop
Signal Path Analog Hardware
Made In Japan
Date Produced 1982
Dimensions Turntable: 6.9"x22.1"x18.4" PSU/Controller: 3.8"x6.5"x16.2" (HxWxD)
Weight Table: 39.7lbs PSU: 13.2lbs Plinth: 42lbs Toneboard: Unknown
Power Source 100VAC 50/60Hz, 25W
Additional Specifications
Speed Select 45 rpm
Speed Select 33⅓ rpm
Speed Select 78.26 rpm
Drive Type Direct Drive Motor shared with SP-02M Cutting Lathe
Turntable SP-10Mk3
Plinth SH-10B5 Technics Non-Resonant Compound (TNRC) (Marketed as "Obsidian")
Cartridge EPC-P100CMK4 P-Mount, OEM with SL-1000 MK3D
Pitch Control ±9.9% 0.1% steps
Speed Drift ±0.001%
Wow and Flutter 0.0015% Wrms (JIS C5521)
Wow and Flutter ±0.0021% weighted zero to peak (DIN45507, IEC98A
Platter Diameter 12.6" 0.6" Thickness
Platter Mass 22lbs Copper Alloy and Aluminum Diecast
Intertial Mass 1,100kg/cm²
Startup Torque 16kg/cm
Startup Time 0.25s (33⅓ rpm)
Braking Time 0.3s (33⅓ rpm)
Load Change 10kg/cm with 0% deviation
Rumble (DIN-A) -60dB (IEC 98A, unweighted)
Rumble (DIN-B) -92dB (IEC 98A, weighted)
Tonearm Straight-arm Variant of EPA-100MK2 Unique to Model, Boron Titanium Construction, Gimbal Mount, Ruby Bearings, P-Mount
Effective Bearing Gap 30mm Horizontal and Vertical
Effective Arm Length 250mm
Overhang 15mm
Offset Angle 21°
Horizontal Tracking Error Angle +1°6' (Inner Circumference 30cm Record), +2°6' (Circumference 30cm Record)
Effective Arm Mass 12g (Cartridge Mass 6g)
Arm Resonance Frequency 10.3Hz
Arm Resonance Sharpness (Q) <6dB
Needle Pressure 1.25g
Output Cable Resistance 39mΩ/m
Output Cable Capacitance 41pF/m
Type: Alphanumeric LED
Indication: RPM
Scale: 33/45/78
Type: Alphanumeric LED
Indication: Pitch
Scale: ±9.9%
Connector: RCA (Phono, Cinch)
Description: Stereo, Unbalanced, Cable Mount
Parameter: RPM Select
Control Type: Momentary Push Switch
Range: 33/45/78
Parameter: Pitch Lock
Control Type: Momentary Push Switch
Parameter: Pitch Adjust
Control Type: Momentary Push Switch
Parameter: Power
Parameter: Start/Stop


Login or Register to post a comment