Main Details
Maker Lenco Brand Lenco of Switzerland Company
  • 2 Channel × Channel
Signal Path Analog Hardware
Made In Italy
Dimensions 412 x 331 x 115 mm / 16.2 x 13 x 4.5 inch
Weight 6 kg / 13 lb
Power Source AC 110 to 220V 50Hz
Notes There is an antiskating weight of 1 g & 1,7 g supplied. Tracking weight is adjusted in the regular way by screwing the counterweight on the back of the arm closer or further from the balance point of the arm. The arm has a standard SME fitting, the Lenco headshell has two adjustable screws to adjust the cartridge alignment. A white hole adapter is supplied. Speed can be fine tuned by moving the fixed positions of the speed slider control after setting them loose by the corresponding screw. Supplied with a Lenco headshell and Lenco M100 cartridge with corresponding stylus. This is an original Lenco of Switzerland-product, not the cheap line of Asian USB-turntables released nowadays under the same brand.
Additional Specifications
Speed Select 33⅓ rpm
Speed Select 45 rpm
Drive Type Belt Drive
Phono Out
Connector: RCA (Phono, Cinch)
Earth Wire
Connector: Other
Parameter: Speed Control
Control Type: Rotary Switch
Parameter: On/Off
Control Type: Rotary Switch
Parameter: Arm Up/Down
Control Type: Slide Switch
Parameter: Antiskating
Control Type: Rotary Pot


Login or Register to post a comment