FMI 14

Amplifier, Microphone, EQ, Signal Distribution

Main Details
Maker Rane Company
Additional Model ID FLEX Series
  • 1 × Channel
Form Factor Half-Width
Signal Path Analog Hardware
Made In USA
Date Produced 1990
Dimensions 8.5"H x 1.75"W x 8"D (21.6 cm x 4.4 cm x 20.3 cm)
Weight 4 lb (1.8 kg)
Power Source FRS 8
Notes The FMI 14 has been designed to operate in a very
similar fashion to most mixer input strips. The input GAIN
control, PAD, Overload indicator and PHANTOM POWER
selector have all been placed at the top (in the vertical
mounting configuration). Next down the line comes the EQ
section, then the AUX source selectors and level controls,
and finally the MASTER faders. Anyone familiar with
mixers should have no difficulty mastering the FMI 14.
Mic Input
Connector: XLR
Description: Balanced
Line Input
Connector: 1/4" Phone Jack (6.35mm)
Description: Balanced
Connector: 1/4" Phone Jack (6.35mm)
Aux A/B
Connector: 1/4" Phone Jack (6.35mm)
Description: Unbalanced
Master A/B
Connector: 1/4" Phone Jack (6.35mm)
Description: Balanced
FLEX Bus In/Out
Connector: DIN
Description: 7 Way


Login or Register to post a comment