Studio Projects



Main Details
Maker Studio Projects Designer
  • Microphone (Single Diaphragm Condenser Microphone)
  • 1 × Channel
Signal Path Analog Hardware
Made In Desiged in USA manufactured in China
Dimensions Diameter: 2.1” (53,34mm) Length: 8.9” (226,06mm)
Weight 26.9oz (762,6g)
Power Source 48 +/- 4V (phantom)
Frequency Response 30Hz~20000Hz
Notes The Studio Projects C1 is an externally polarized cardioid pressure gradient transducer microphone with FET impedance converter. Diaphragm material is 6μm mylar for natural reproduction of vocals and instruments.
It features dual selectable pads and high pass filters for a total of nine possible modes of operation.
The output circuitry is active and is capable of driving long cable runs.
Additional Specifications
Type Single diaphragm pressure gradient condenser microphone
Polar pattern Cardioid
Sensitivity 14mV/Pa=-37dB (0dB=1V/Pa)
Output impedance <200 Ohm
Load impedance >1000 Ohm
Maximum SPL 131 dB SPL for 1% THD @1000Hz (0dB SPL=0.00002Pa)
Noise (Line): 27dB (A weighted)---17dB
S/N ratio 77 dB
Current consumption <2.5mA
Circuit JFET impedance converter, discrete balanced output
Gold-plated 3-pin connector
Connector: XLR
Description: Plug (Male), Mono, Balanced
Parameter: PAD
Control Type: Toggle Switch
Range: -10dB or -20dB
Parameter: Low cut
Control Type: Toggle Switch
Range: 75Hz or 150Hz (6dB/Octave)


Login or Register to post a comment